Callaham Vintage Guitars & Parts  

 Callaham Guitars Facebook Page Callaham Guitars Instagram Page Callaham Guitars YouTube Channel  
 
Product Catalog   |   Technical Info   |   About Us   |   Order Direct   |   Dealers   |   Contact


 
Callaham Pickguards for S Model Guitars
 

Callaham Pickguards for S Model Guitars

Our pickguards are made to fit U.S.A. made Fender reissue or relic guitars, and Pre-CBS guitars. Minor fitting may be required on some older Made in Japan and Mexican made Fender models. We do two 11-hole patterns: the original 59 to 63 pattern and the late 63 pattern currently used on American Standard guitars. Our 8-hole pattern is the original pattern from late 54 to mid 59.

Getting a good looking single ply guard was very difficult. All that was available was a very bright refrigerator white. We had a 1-ply parchment white material (.060" thick) produced to solve this problem. It is best described as an off white with a yellow hue and was matched to original 56, 57, pickguards that would be considered mint condition. It looks naturally old and gives any guitar a vintage look. It is an acrylic and will not warp like pvc.

We make all our pickguards in house with material made in the USA. What sets us apart is the hand deburring and cleanliness of our edges. Nobody makes a pickguard close to our quality.

Options:

Available Materials:
  • 1 Ply Parchment White (.060 thick)
  • 3 Ply Mint Green (.090 thick)
  • 3 Ply Parchment White (.090 thick)
Available Hole Patterns:
  • Vintage Late 54 to Mid 59 8-Hole
  • Vintage Late 59 to 63 11-Hole
  • Late 63 11-Hole, currently used in American Standard Guitars
Available in left or right hand configurations

Pairs perfectly with our Full Aluminum Pickguard Shield
 
 
Pricing:
 
  1 Ply Parchment White   $30.00
 
  3 Ply Mint Green   $40.00
 
  3 Ply Parchment White   $40.00
 
Optional Charges
 
  Antiqued   +$40.00
 
 
 
 
Related Parts
 
Pre-wired S Model Pickguard Assembly Callaham Vintage S Model Strat Hardware Kit Stainless Steel Phillips Head Pickguard Screws
 
Callaham Pre-wired S Model Pickguard Assembly Callaham Vintage S Model Strat Hardware Kit Stainless Steel Phillips Head Pickguard Screws
 
 
 
 
  For Ordering Instructions and Shipping Rates, go to our Order Direct page.


Prices and Content subject to change without notice.
 
© 1996-2017 by Callaham Guitars™. All rights reserved.
This website is protected by copyright and trademark laws under U.S. and International law.
All images and content may not be reproduced without written permission of Callaham Guitars™.
Stratocaster®, Strat® & Tele® are registered trademarks of Fender Musical Instruments Corp.
Callaham Guitars™ is not affiliated with Fender Musical Instruments Corp.
This page last modified August 31, 2017
 

 
Callaham Guitars ™ 
 
Home | Product Catalog | Technical Info | About Us | Contact
Order Direct | Printable Order Form | Dealers
Strat® Parts | Tele® Parts | Gibson® Parts | Bigsby® Parts